Run test fires

Carefully follow the steps described in this topic to run test fires.

Prerequisites

  1. Ensure you have read through the Test fire guidelines before proceeding.

  2. Contact the local fire department / authorities and clarify whether you are allowed to make a test fire.

Extinguish the fire after running the fire test

Take precautions and make sure you can extinguish the fire. Do not leave hot ash in the forest. Also, as a precaution, have sufficient water available to be able to extinguish the fire after the test.

1. Record weight of test fire material

Record the weight and type of material you plan on burning. You need this information for any follow up tests to ensure you consistently use the same weight and type of material for each test fire.

  • Record the type of material you plan on burning.

  • Record the weight of the material you plan on burning for the duration of this test fire, including the material you plan on adding to keep the fire burning.

2. Burn test fire continuously for 30 minutes

After the sensors and Border Gateway have been deployed and the sensors have connectivity to the Silvanet network, you are ready to burn a test fire to generate smoke.

Artificial fire lighter

Do not use any artificial fire lighter as these have a different chemical composition and set free other burning gasses that can create false measurements from the sensors.

Smoke not sparks

Ensure the fire does not send out sparks and that it consists mostly of smoke due to the burning needles. Ensure the fire is generating smoke rather than having a burning camp-fire style fire.

Use proper fire pit

A BBQ may not provide the appropriate level of smoke, nor duration.

  1. Use a metal fire pit with a diameter of approximately 1 m and place it in the middle of the deployed sensors.

  1. Start the test fire by igniting small, dry branches and slowly grow the fire.

  1. Burn the fire for approximately 30 minutes by using small branches to keep the fire going. Add smaller branches with needles on top of the fire. Constantly feed the fire with fresh material to ensure the fire continuously burns for 30 minutes.

3. Ensure continuous exposure to smoke

Sensors need 1-5 min of smoke exposure to trigger a fire detection process.

Visually confirm smoke from the fire reaches the sensors.

4. Fire alerts

The expected time between the ignition of the fire and receiving a fire alert should be within minutes. You should expect a fire alert in the Site Management app and receive a fire alert email.

A fire alert icon appears in the map for the Site displaying the fire's location. Open the details of the fire by clicking the fire alert Icon.

5. Record the results

During and after the test, document the results of the test. It should include the following information:

  • Distance of the fire pit to the Sensor(s) that triggered a fire alert.

  • Weight of the amount of material used for the duration of the test fire, including the material added to the fire during the burn.

  • Duration of the burn.

  • Visual confirmation of smoke hitting the sensors (ideally as a video).

The test conditions must be documented precisely. For example, document the wind direction, wind speed, changing winds and other environmental conditions which allow for an accurate evaluation of the reaction of the sensors.

Record the test fire

Take videos and/or pictures of the fire during the test. They are useful during troubleshooting. The results are useful for creating and updating the ML model with data from real-world tests.

6. Ensure fire is completely extinguished

Ensure the fire is completely extinguished. Look for any embers under the burnt material. Do not let any embers escape the fire pit/bowl and ignite the surrounding ground material.

Completely extinguish the fire

Ensure that the burnt material has been put out thoroughly and there are no hidden embers. This is to avoid a fire unintentionally starting.

Optional: Repeat fire tests

Repeating a fire test can be done but We highly recommend leaving a 4-hour time gap between fire tests.

See Also

For more information, see Four hour gap between fire tests in Test fire guidelines.

Last updated

Docs Version

Version 4.3.5

Sales Enquiry

Contact Dryad Sales

© 2024, Dryad Networks GmbH, Eisenbahnstr. 37, 16225 Eberswalde, Germany