search
Get StartedExplore SilvanetPlan a SiteDeploy SilvanetFAQ

barcodeRegister Border Gateway

Before mounting the Border Gateway, register the Device ID using the Deployment app to provide its GPS location with the Silvanet Cloud.

circle-info

Device ID

Each Silvanet Border Gateway has its own unique Device ID (also referred to as Serial ID). It is provided as a unique text string as well as a QR Code printed on a label attached to the Border Gateway.

hashtag
Register Device ID

To register the Border Gateway's Device ID, scan the QR Code (for Gen 2) or use NFC (for Gen 3).

  1. In the Silvanet Deployment app, select a Site.

Select a Site

  1. In the list of devices that appears, select a Border Gateway. Alternately, select Show Devices on Map.

Select a device to install

  1. On the map that appears, tap Register Device. The blue dot on the map shows your current location.

Tap Register Device to begin
circle-info

Finding the deployment location

In the figure above, the Border Gateway is 120 m away from the user. Use this map to move towards the deployment location.

  1. If you tapped Show Devices on Map, the maps shows on overview of your Site. Your location is indicated by a blue dot.

Current location

  1. Once the deployment location is found, register the Device ID.

  2. Use the Deployment app to scan the device's QR Code, which is attached to the back of the Border Gateway.

Scan QR Code
circle-info

QR Code not scannable?

If the QR Code cannot be scanned, manually enter the Device ID which is found as a text string next to the QR Code.

  1. The Deployment app automatically fills in the Gateway's latitude and longitude using the Smartphone's GPS location.

  2. After a few moments, the Registration successful message appears. The device icon changes from Planned to Deployed. For more information, see Status icons.

Registration successful

hashtag
Next steps

After a successful Device Registration, the Border Gateway can be permanently mounted to the tree or pole. The Deployment app provided guidelines for mounting the Border Gateway.

Mounting instructions

Mount the Border Gateway to a metal or wood pole or on a tree, as described in the following sections. Afterwards, mount the solar panel(s). Alternately, use the PoE Injector to provide power from mains, if available.

circle-info

Relocating a Border Gateway

For more information, see Relocate a Silvanet Sensor or Gateway.

PreviousDeploy Border Gateways (Gen 2/3)NextMount Border Gateway (Gen 2)

Last updated

Was this helpful?