Register Mesh Gateway

Register the Silvanet Border Gateway to ensure it reliably communicates with the Mesh Network and Silvanet Cloud.

When you are ready to deploy the Mesh Gateway, do the following:

• Scan the QR Code to register the device.

• Mount the Mesh Gateway.

• Run connectivity test.

See also

• Mesh Gateway deployment guidelines

• Deployment overview

• Mount Mesh Gateway (Gen 2)

• Start Connectivity Test

Scan QR Code

1. In the Silvanet Deployment app, select a Site.

Select a Site

2. In the list of devices that appears, select either Show Devices on Map or select a device.

Select a device to install

3. If you selected a specific device, the map of the Site appears with the selected Silvanet device highlighted. Your location is indicated by a blue dot. Tap Register Device.

Tap Register Device

4. Using the Deployment app, scan the device's QR Code, which is usually attached to the back of the Silvanet device. The Silvanet Deployment app automatically fills in the Silvanet device's latitude and longitude using the Smartphone's GPS location.

Scan the Mesh Gateway QR Code

5. After a few moments, the Registration successful message appears.

Mesh Gateway registration successful

Next steps

After a successful registration, the Deployment app provides guidelines for mounting the Mesh Gateway. The Deployment app provides guidelines for mounting the Mesh Gateway.

Mounting Instructions

For detailed instructions on mounting the Border Gateway on either a pole or a tree, see Mount Mesh Gateway (Gen 2).

Connectivity Test

When the Mesh Gateway has been mounted, begin the Mesh Gateway Connectivity Test. See Start